Research Article
BibTex RIS Cite

COMPARISON OF CAD AND MANUAL SYSTEM EFFICIENCY IN PRE-PRODUCTION PREPARATION PROCESS

Year 2019, Volume: 29 Issue: 1, 73 - 84, 26.03.2019
https://doi.org/10.32710/tekstilvekonfeksiyon.437799

Abstract

In the ready-made clothing industry, computer aided
design (CAD) systems are most commonly used for basic pattern making, grading
and marker making processes.  Even though
there are various software in this area in the market, pattern making process
is still performed manually in several ready-made clothing businesses. In this
research, the amount of time required for the processes of clothing technical
pattern making, modelling, grading and marker making via CAD systems has been
compared to time required for the manual method, with the aim of determining
the more efficient approach. To this end, time measurements for the steps of
these processes, specified by 3 expert pattern designers and 3 CAD operators,
were taken and compared. The comparison has been focused on the aspects of
processes that made a difference in terms of time, the effect of these
processes on total time and the identification of the factors that resulted in
the time difference.  Upper-body clothing
has been chosen as the focus of this study due to the involvement of several
steps in the processes of basic pattern making and grading. The acquired data
has shown that the process times required for CAD systems have been shorter
than those for manual design in every step that have an important place in the
pre-production preparation process.

References

  • Archana P., 2013, Efficacy of Pattern Making Software in Product Development, International Journal of Advanced Quality Management, Volume 1, Issue 1, pp. 21-392.
  • Dabolina, I; Vilumsone, A., 2012, The Role of the Latest Clothing CAD/CAM System Applications in the Educational Process, Material Science, Textile and Clothing Technology Vol. 7, pp:63.
  • Şen, A., Öndoğan, Z., 2004. Hazır giyim koleksiyonu hazırlığında CAD sistemlerinin kullanımı, IV. Ulusal Üretim Araştırmaları Sempozyumu, Konya
  • Kayaalp, İ., D., Öndoğan, Z., 2004, Hazır Giyim Endüstrisinde Giysi Kalıbı ve Kesim Planı Hazırlama İşlemlerinde CAD Sistemlerinin Kullanımı, IV. Ulusal Üretim Araştırmaları Sempozyumu, Konya
  • Rahman, M.F., Rashid, M. R., Haque E.and Hasan, Z., 2017, Effect of Garment Size Ratio and Marker Width Variation on Marker Efficiency for both Manual and Computerized Marker; European Journal of Advances in Engineering and Technology, 4(10): 765-772
  • Naveed T., Hussain A. and Zhong Y., 2017; Reducing fabric wastage through image projected virtual marker (IPVM); sagepub.co.uk/journalsPermissions.nav
  • Singh S., Singh R., 2017, Development of a CAD Tool for Pattern Making of Garments; ; International Journal of Innovative Computer Science & Engineering Volume 4 Issue 2; March-April-2017; Page No. 11-15
  • Öndoğan Z. And Erdoğan Ç. M., 2006; The Comparison of the Manual and CAD Systems for Pattern Making, Grading and Marker Making Processes, Fibres & Textiles in Eastern Europe January / March 2006, Vol. 14, No. 1 (55)
  • Özkan, M., 2006, Türkiye’de Hazır Giyim Sektöründe Kullanılan Bilgisayar Destekli Kalıp Hazırlama Sistemlerinden Assyst, Konsancad ve Lectra Sistemlerinin Karşılaştırılması, Selçuk Üniversitesi Sosyal Bilimler Enstitüsü Yüksek Lisans Tezi, Konya, s.s:93
  • Şen Kılıç, A.; Yücel, Ö., 2011, Konfeksiyon Üretiminde Konvansiyonel ve Bilgisayar Destekli Kalıp Hazırlama Yöntemlerinin Birim Maliyetler Açısından Karşılaştırılması, 2011, Konfeksiyon Teknik, P.P:62-66
  • Göksel, N., Utkun E., Öndoğan Z., 2012, Giysi Tasarımında Bilgisayar Destekli Kalıp Hazırlama Yönteminin Kullanımı, Tekstil ve Konfeksiyon, 4/2012, p.p:375-382
  • Kayar, M., Dal, V., Mıstık, S.İ, 2015, Investigating The Effect of The Marker Assortment Size Distribution and Fabric Width on The Fabric Use Efficiency; Industria Textila, 2015, vol. 66, nr. 3, p.p:142
  • Haque,M. N., 2016, Impact of Different Sorts of Marker Efficiency in Fabric Consumption, International Journal of Textile Science 2016, 5(5): 96-109
  • Kansoy O., Erdoğan M, 2006, Giysi Model Özelliklerinin Parça Sayısı, Parça Çevresi ve Dikim Süresi İle İlişkileri, Tekstil ve Konfeksiyon, 2006(1), s.s:320-324
Year 2019, Volume: 29 Issue: 1, 73 - 84, 26.03.2019
https://doi.org/10.32710/tekstilvekonfeksiyon.437799

Abstract

References

  • Archana P., 2013, Efficacy of Pattern Making Software in Product Development, International Journal of Advanced Quality Management, Volume 1, Issue 1, pp. 21-392.
  • Dabolina, I; Vilumsone, A., 2012, The Role of the Latest Clothing CAD/CAM System Applications in the Educational Process, Material Science, Textile and Clothing Technology Vol. 7, pp:63.
  • Şen, A., Öndoğan, Z., 2004. Hazır giyim koleksiyonu hazırlığında CAD sistemlerinin kullanımı, IV. Ulusal Üretim Araştırmaları Sempozyumu, Konya
  • Kayaalp, İ., D., Öndoğan, Z., 2004, Hazır Giyim Endüstrisinde Giysi Kalıbı ve Kesim Planı Hazırlama İşlemlerinde CAD Sistemlerinin Kullanımı, IV. Ulusal Üretim Araştırmaları Sempozyumu, Konya
  • Rahman, M.F., Rashid, M. R., Haque E.and Hasan, Z., 2017, Effect of Garment Size Ratio and Marker Width Variation on Marker Efficiency for both Manual and Computerized Marker; European Journal of Advances in Engineering and Technology, 4(10): 765-772
  • Naveed T., Hussain A. and Zhong Y., 2017; Reducing fabric wastage through image projected virtual marker (IPVM); sagepub.co.uk/journalsPermissions.nav
  • Singh S., Singh R., 2017, Development of a CAD Tool for Pattern Making of Garments; ; International Journal of Innovative Computer Science & Engineering Volume 4 Issue 2; March-April-2017; Page No. 11-15
  • Öndoğan Z. And Erdoğan Ç. M., 2006; The Comparison of the Manual and CAD Systems for Pattern Making, Grading and Marker Making Processes, Fibres & Textiles in Eastern Europe January / March 2006, Vol. 14, No. 1 (55)
  • Özkan, M., 2006, Türkiye’de Hazır Giyim Sektöründe Kullanılan Bilgisayar Destekli Kalıp Hazırlama Sistemlerinden Assyst, Konsancad ve Lectra Sistemlerinin Karşılaştırılması, Selçuk Üniversitesi Sosyal Bilimler Enstitüsü Yüksek Lisans Tezi, Konya, s.s:93
  • Şen Kılıç, A.; Yücel, Ö., 2011, Konfeksiyon Üretiminde Konvansiyonel ve Bilgisayar Destekli Kalıp Hazırlama Yöntemlerinin Birim Maliyetler Açısından Karşılaştırılması, 2011, Konfeksiyon Teknik, P.P:62-66
  • Göksel, N., Utkun E., Öndoğan Z., 2012, Giysi Tasarımında Bilgisayar Destekli Kalıp Hazırlama Yönteminin Kullanımı, Tekstil ve Konfeksiyon, 4/2012, p.p:375-382
  • Kayar, M., Dal, V., Mıstık, S.İ, 2015, Investigating The Effect of The Marker Assortment Size Distribution and Fabric Width on The Fabric Use Efficiency; Industria Textila, 2015, vol. 66, nr. 3, p.p:142
  • Haque,M. N., 2016, Impact of Different Sorts of Marker Efficiency in Fabric Consumption, International Journal of Textile Science 2016, 5(5): 96-109
  • Kansoy O., Erdoğan M, 2006, Giysi Model Özelliklerinin Parça Sayısı, Parça Çevresi ve Dikim Süresi İle İlişkileri, Tekstil ve Konfeksiyon, 2006(1), s.s:320-324
There are 14 citations in total.

Details

Primary Language English
Subjects Wearable Materials
Journal Section Articles
Authors

Arzu Kılıç

Publication Date March 26, 2019
Submission Date June 28, 2018
Acceptance Date March 7, 2019
Published in Issue Year 2019 Volume: 29 Issue: 1

Cite

APA Kılıç, A. (2019). COMPARISON OF CAD AND MANUAL SYSTEM EFFICIENCY IN PRE-PRODUCTION PREPARATION PROCESS. Textile and Apparel, 29(1), 73-84. https://doi.org/10.32710/tekstilvekonfeksiyon.437799

No part of this journal may be reproduced, stored, transmitted or disseminated in any forms or by any means without prior written permission of the Editorial Board. The views and opinions expressed here in the articles are those of the authors and are not the views of Tekstil ve Konfeksiyon and Textile and Apparel Research-Application Center.